LaserBridge
e.laser
Spartacus
EvoMatrix II
Cometa
JumboCut
MegaCut
FlexiCut
EuroFlex
|
Click Here For
Technical Specifications
|
Description
Cometa has the largest cutting area of all the Proel plotter type laser cutting and engraving machines.
This machine, available in the 25, 50 or the 100 Watt version, is ideal for those who need to cut or engrave large patterns up to 1600x850 mm.
Roll material is supported by an optional roll feeder unit.
Features
The machine is equipped with a CO2 Laser source of 25, 50, 100 or 200 Watt (air-cooled) and a cutting head
driven on two axes by powerful brushless motors. It can be configured with either a fixed cutting plane or a motorized
cutting plane (for automatic loading/discharge of material to be worked/finished). Usable cutting area 1600x850 mm,
external fume evacuation unit that may be connected to a filtering unit. Cometa also has an RS-232 interface for connection to a Personal
Computer and can be set at three different power levels (usually one for cutting and two for engraving) as well as
two cutting modes: constant speed or variable speed for optimizing work loads. The cutting head can be cleaned by compressed air from
either an internal pump or an external source or with gases specific for laser cutting
(usually Nitrogen). It also has a Laser pointer to aid in positioning the material.
|
Control Functions
Memorization of 10 different work profiles
Management of 6 languages for interfacing with the user
Management of ten levels of laser power
Setting of the cutting/engraving speed
Setting of the cutting head handling mode
Possibility of manually positioning the cutting head by means of the control panel
Possibility of manually handling the cutting plane advancement by means of the control panel
"Spot Laser" function for locating the laser ray on the material to be used
"Pause Cut" function
Possibility of continuing an unfinished job even after an electrical power failure
Self-diagnostic feature
Cutting assisted by a videocamera
Cutting of compositions (automatic repetition of the same cutting shape)
Management of different fume suction modes
Possibility of cutting the material in a straight line by means of the control panel
Work hours count
Work cycles count for each job
Display of the position of the cutting head (in X,Y coordinates)
|
|
